PORPERTIES
 1) Easy to use
 2) Does not flake off
 3) Has high adhesion power
 4) Applicable up to 4mm in thickness
 5) High coverage
 6) Quick drying
 7) Vapour permeable

USES
When dry, GM11 Interior Acrylic Putty bonds extremely well to cementitious materials, gypsum, gypsum boards, spray plasters, wood, galvanised steel lathings and all common building surfaces.

Ideal as a gypsum board jointing compound and skim coat, for patching hairline cracks in walls, ceilings, repairing damage to plaster/paint work,nail holes in woodwork, making good around door architrave’s and along the top of skirting boards.

SURFACE PREPARATION

New surfaces: 
1) Ensure that all dust, dirt and foreign matter are scraped and brushed away. Also ensure the surfaces are free from salts, oil, grease and ridges.

2) Protect all adjacent surfaces not to be covered.

Old surfaces:
1) Before applying to old surfaces, ensure the substrate is firm.

2) First wash down the surface with a sugar soap solution, rinse and allow drying before repairing or applying the primer.

APPLICATION
1) Apply the Wall Putty in a thin even layer.

2) If a thick coat is necessary, apply several thin layers, allowing drying between layers.
3) Lightly sand the final surface before painting, within 24 hour of application.

PRECAUTIONS 
Avoid prolonged contact with eyes and skin. For detailed information refer to relevant material safety data sheet.

CLEAN UP
Clean tools and equipment with water after use.