FEATURES

1) 100% acrylic- Excellent adhesion and moisture resistance

2) Excellent durability-Long lasting, non-chalking

3) Excellent adhesion-Resist cracking and peeling

4) U.V. protection-Looks like new longer

5) Creates mildew resistant coating-Mildew/fungus/biological growth resistance on the paint film

6) Low temperature application-May be applied down to 35º F (2ºC)

7) Fast drying-Turns jobs faster

8.) Soap and water cleanup-Easy to clean up hands and tools

9) 10 years warranty

RECOMMEDNED FOR

1) Aluminum Siding

2) Fiber Cement

3) Brick Steel Siding

4) Concrete/Masonry

5) Vinyl Siding

6) Concrete/Masonry

7) Block Wood

8.) Ferrous Metal

APPLICATION

1) Use product on dry substrates when both air and surface temperatures are above 35°F (2°C). Surface temperatures must remain above 35°F (2°C) for 4 hours after applying.

2) Stir paint occasionally. Intermix containers of the same product to ensure color and sheen uniformity.

3) On semi-smooth surfaces, use a high quality 3/8 -1/2” nap roller cover, nylon/polyester brush or an airless sprayer (.015 – .021″ spray tip, 60 mesh filter). On rough surfaces, use a high quality 3/4-1” nap roller cover.

4) Typical coverage is 250-400 sq. ft. (23-37 m2) per gallon depending on surface texture, porosity and application method.

5) No thinning is usually required. If necessary, thin with up to 1/4 pint (118 mL) of water per U.S. gallon (3.78L) of paint. However, if using a sprayer, thin with water at a rate of no more than 1/2 pint (236 mL) per gallon.

6) More than one topcoat may be required for complete hide.

DRY TIME

1) Dries to the touch in 2 hours at 77°F (25°C) and 50% humidity. Allow at least 4 hours of dry time between coats.

2) Dries to the touch in 4 hours at 35°F (2°C) to 45°F (7°C) and 50% humidity. Allow at least 8 hours of dry time between coats.

3) On heavy stains and woods that contain tannins, allow 12-16 hours of dry time between coats.

4) Longer dry time required in cooler temperatures and in higher humidity.

5) Darker colors may require additional dry time between coats.

6) After 2-4 weeks, cured paint film may be cleaned with a mild, non-abrasive liquid detergent.

7) Dry paint film is mildew resistant.

CLEAN UP & STORAGE

1) Use soap and water.

2) Properly dispose of all soiled rags and protect unused product from freezing.

3) For disposal of unused paint products, please contact your household refuse collection service.